Unit 6 Assignment 1 Ad User

In: Computers and Technology

Submitted By sasin101
Words 321
Pages 2
Unit 6 Assignment 1 AD User / Group Design Scenario
------------------------------
To: Junior Admin
I received your e-mail asking how to provide access to resources throughout your AD environment and you are not sure which strategies are best for the different situations you are encountering. I would recommend that since you have a domain for each department, such as Marketing, accessing one printer is very easy. To start, you will need to create a group that allows access to the one printer within each department. Once you have created each group you will then assign it to a domain local group, global group, and then to a universal group. Finally adding it to the Marketing domain group.

With your HR, you will need to take all the users within the forest and add them to a global group, and then the universal group. Next, take the universal group and add it to the domain local group within their domain. These users will then have access to whatever is in that universal group, and therefore you must make sure that you assign the printer for them to print vacation requests to the HR department.

With R&D, you will need to take a slightly different approach. To allow access to only the server, first you must create a domain local group that has some administrative rights. Then you will need to add them to a customized admins group that you have control of. You can then assign the permissions and rights as you create and assign them. Remember to limit access to their local machines only. Through the desktop local user account settings, you will be able to do all of this. This is just one of the approaches you can take. If you choose, you can take a different approach. If you may have any further questions or problems, feel free to contact me again.
Best of luck
IT Admin…...

Similar Documents

Unit 6 Assignment 1 - Ad User Group Design

...Unit 6 Assignment 1: AD User/Group Design Scenario To: Junior Admin I received your e-mail asking how to provide access to resources throughout your AD environment and you are not sure which strategies are best for the different situations you are encountering. I would recommend that since you have a domain for each department, such as Marketing, accessing one printer is very easy. To start, you will need to create a group that allows access to the one printer within each department. Once you have created each group you will then assign it to a domain local group, global group, and then to a universal group. Finally adding it to the Marketing domain group. With your HR, you will need to take all the users within the forest and add them to a global group, and then the universal group. Next, take the universal group and add it to the domain local group within their domain. These users will then have access to whatever is in that universal group, and therefore you must make sure that you assign the printer for them to print vacation requests to the HR department. With R&D, you will need to take a slightly different approach. To allow access to only the server, you have to first create a domain local group that has some administrative rights. Then you will need to add them to a customized admins group that you have control of. You can then assign the permissions and rights as you create and assign them. Remember to limit access to their local machines only. Through......

Words: 320 - Pages: 2

Unit 6 Assignment 1

...Chapter 6: Conceptual Review Questions (All Questions worth 5 points each) Match the information below with Questions 1 through 14. |A. Compound Interest |E. IRR |I. PMT |M. ROI | |B. CUMPRINC |F. NPER |J. PPMT |N. Simple Interest | |C. FV |G. NPV |K. PV |O. SLN | |D. IPMT |H. Payback Period |L. RATE |P. Type | 1. Function to calculate the interest percentage per period of a financial transaction 2. Function to calculate the value at the beginning of a financial transaction 3. Function to calculate value of the end of a financial transaction 4. Function to calculate periodic payments in or out of a financial transaction 5. Function to calculate the number of compounding periods in a financial transaction 6. Use a “1” for this argument to indicate that interest will be paid at the beginning of each compounding period 7. This type of interest is calculated based on original principal regardless of the previous interest earned 8. This type of interest is calculated based on principal and previous interest earned 9. Function to calculate straight line depreciation based on the initial capital investment, number...

Words: 622 - Pages: 3

Is3230 Unit 6 Assignment 1

...You are provided with the following list of privileges, roles, rights, and actions: 1. Must authenticate when accessing network resources 2. Is allowed remote access 3. Periodically reviews all user accounts 4. Authorizes risk assessments 5. Performs security assessments 6. Creates group policy objects 7. May send inbound e-mail 8. Is allowed to install software in a secured network 9. Performs daily log reviews 10. Is allowed to change the firewall rules 11. Manages incident response 12. Provides user awareness training 13. Access the file system within authorized system and groups 14. Develop infrastructure architecture plan 15. Manages Internet service provider (ISP) and Internet connectivity 16. Install patches on production system 17. May delete files from group folder 18. Installs security software 19. Create system users 20. Monitors systems for dormant accounts 21. May request file system changes 22. Develops and implements configuration standards 23. Grants access to resources 24. Create user accounts 25. May make file system changes 26. Run a backup program to capture changes to data and systems 27. May appoint a data/application custodian 28. May disable/delete unused accounts 29. May bypass authentication 30. Approves access to resources In the table given below, you need to relate the matching privileges, roles, rights, and actions to the account type on the left...

Words: 269 - Pages: 2

Unit 6 Assignment 1

...easy to do. To start off you will need to create a group that allows access to the one printer within each department in your company. After creating each group you must then assign it to a domain local group, global group and then to a universal group. Then you will need to add it to the marketing domain local group. For HR, you will need to take all of the users within the forest and add them to a global then universal group. Then to take the universal group and add it to the domain local group within their domain. These users will then have access to whatever is in that universal group, you must make sure that you assign the printer for them to print vacation requests to the HR department. You must do things a little different for research and development. To allow access to only the server, you must first create a domain local group that has some administrative rights. Add them to a customized admins group that you have control of. You can assign these rights and permissions as you create and assign them. Remember to limit their access to their local machines only. You can do all of this through the desktop local user account settings. If you have any problems or questions feel free to contact me again....

Words: 255 - Pages: 2

Unit 6 Assignment 1

...IS3340-WINDOWS SECURITY | Minimizing Recovery Time Strategies | Unit 6 Assignment 1 | | | 5/5/2014 | | This document outlines the required steps to follow, in-order to properly scan the necessary servers and workstations in the Ken 7 Windows Limited Domain for security vulnerabilities. 1) Acquire and install MBSA(Microsoft Baseline Security Anaylizer) •Download MBSA. Download MBSA from the MBSA home page, and then install it to the default directory. •Updates for MBSA. If both the computer you will be scanning and the computer with MBSA installed have Internet access, the latest security catalog (.cab file), authentication files, and WUA installer files will be automatically downloaded, if needed. If either the target computer or the computer with MBSA installed does not have Internet access, download the following files and place them in the C:\Documents and Settings\<username>\Local Settings\Application Data\Microsoft\MBSA\2.0\Cache\ directory on the computer that is performing the scan. 2) Scan computers Run MBSA and clear the Check for security updates check box when performing the scan. Using the Graphical Interface Tool The following procedure describes how to use the MBSA GUI tool. To use the MBSA GUI tool to scan for updates and patches 1. On the Programs menu, click Microsoft Baseline Security Analyzer. 2. Click Scan a computer. 3. Make sure that the following options are not selected, and then click Start scan. *......

Words: 487 - Pages: 2

Nt Unit 6 Assignment 1

...Unit 6. Assignment 1. AD User/Group Design Scenario Dear Junior Admin, I received your E-mail and in response I recommend that you do the following. Since there is a domain for each department, such as Marketing, accessing one printer is rather easy. To start off you will need to create a group that allows access to the one printer within each department in your company. After creating each group you must then assign it to a domain local group, global group and then to a universal group. Then you will need to add it to the marketing domain local group. For HR, you will need to take all of the users within the forest and add them to a global then universal group. Proceed to take the universal group and add it to the domain local group within their domain. These users will then have access to whatever is in that universal group, therefore you must make sure that you assign the printer for them to print vacation requests to the HR department. You must take a slightly different approach for R&D. To allow access to only the server, you must first create a domain local group that has some administrative rights. Add them to a customized admins group that you have control of. You can assign these rights and permissions as you create and assign them. Remember to limit their access to their local machines only. You can do all of this through the desktop local user account settings. You may also take a different route if you choose to. This is one of the approaches you may......

Words: 288 - Pages: 2

Unit 6 Assignment 1

...Used to connect devices that contained DB9 pin connections usually mouse’s and keyboards. In todays computers Serial Ports have all been upgraded to USB ports. • Parallel Port- Used to connect printers or external devices such as hard disk drives. Parallel Parts are unique with a DB25 pin connection. They call it DSUB or DB25 cause the connection looks like a D • SRAM- also known as (Static random access memory) is a type of semiconductor memory where the word static indicates that, unlike dynamic ram or DRAM, it doesn’t need to be periodically refreshed. • DRAM- also known as (Dynamic Random Access Memory), DRAM is one of the most commonly found memory modules in PC compatible personal computers and workstations. Though out the assignment I have learned and gave my self a clear understanding on what certain terms and well older technology that has paved the way for our new technology to exist. The information in the video clips provided was very informative with helpful hints on what to expect from the A+ certification exam. We will use this information when we build our own system....

Words: 340 - Pages: 2

Unit 6 Assignment 1

...generator. A tone generator is a two-piece unit that consists of a tone generator and a probe. This type of tester's primary function, amongst installers, is to identify specific locations in a punch-down block then label accordingly. According to Oliviero and Woodward (2011, p.442-443), these testers “Transmit[s] a signal, or, with an alligator clip, you connect the unit to an individual wire. The other unit is an inductive amplifier, which is a pen-like probe that emits an audible tone when touched to the other end of the conductor.” Primary functions are identify a particular cable within a bundle and to test for opens, shorts, and miswires of individual wires. Unfortunately, there is a disadvantage to using this device; time consuming. The third and final tester to be discussed are Multifunction Cable Scanners (commonly referred to as a certification tool). Alarmingly, these devices are highly expensive but are available for both copper and fiber-optic networks. Multifunction Cable Scanners (MCS) perform a series of basic tests on a cable run. These test's include wire-mapping, length, attenuation, and NEXT for copper cabling. As for fiber-optic cabling, these scanners perform optical power and signal loss tests. One great advantage to using an MCS is anyone can use it. Connect the unit to a cable, press a button and read off message after tests are completed. On the other hand, the fundamental problem with the process is the user must have sufficient knowledge of......

Words: 399 - Pages: 2

Is3340 Unit 6 Assignment 1

... IS3340 Unit 6 Assignment 1 1. How much data has been modified between the last backup and the time of failure? No data should have been lost since nothing was change since the last backup and the backup would have been completed before the error occurred. 2. What images are necessary to recover the workstation? The images that are necessary would be the reimaging image along with the latest back up image available. 3. What are the steps necessary to fix the problem that cause the data loss? Verify what caused the loss by reading the logs. Determine the fix for the issue. Reimage the computer. Restore the computer to last backup state and disable the issue that caused the data loss. 4. What steps should Ken 7 take to avoid a reoccurrence of this issue in the future? Read the logs to find out what caused the issue that caused the data lose.   Right a procedure guide to prevent the issue from occurring. Alert users of the occurrence of the issue and the way to prevent the issue. (Soloman, 2001) Procedure Guide: 1. Read logs to decide what cause the issue to occur. 2. Re-Image the computer to default configuration. 3. Restore to first available backup of the system. Restore Process: 1. Right-click on your Computer desktop icon (or click Start and right-click on the Computer tab on the right pane of the menu). 2. Click on Properties. 3. Locate the System protection tab in the System Properties menu. 4. Select the hard disk that......

Words: 393 - Pages: 2

Unit 6 Assignment 1

...Unit 6 Assignment 1: Cable Testers In almost every application in dealing with cable installations, cable testing is a must. Some methods of testing cables include testing for attenuation, continuity testers, DC Resistance, a wire mapper and cable length. In all cable types- copper or fiber, 10BASE-T or 100BASEFX, the standards are constantly being changed and developed into a new standard for all future technologies. When testing cable, you can guarantee that the users will be satisfied when all connections prove effective for not just uninterrupted transmission but correct bandwidths to support. A wire mapper is the most common tool. It simply provides a test of a standard Cat5 cable to ensure each individual wire not only carries a strong signal through the entire length of the route, but it proves if each wire ends up in the correct pin number on the opposite end to receive the transmission. It will give the technician an idea if a cable has a short, or if it is a crossover cable. It is also very useful with telephone connections. It should be a part of each cable installation kit. Another common tool is a continuity tester. It shows if there is a direct connection between two points. If there is a closed electrical pathway for the tester to detect, then the device will make a sound. This is useful not only to test for a short, but also to determine and identify which cable is which in a closet full of many cables. This is also a very important tool in any......

Words: 437 - Pages: 2

Unit 6 Assignment 1 Questions

...Unit 6 Assignment 1: Homework Learning Objectives and Outcomes Name the main events in the development of SQL statements. Run SELECT queries with wild cards, DISTINCT key word, calculations, sorting and aliasing. Run queries with the WHERE clause to filter the result sets. Use the Aggregate functions COUNT, AVG, SUM, MIN, and MAX. Assignment Requirements Answer the true-or-false questions on the next page by filling out the answer sheet. Required Resources Textbook Submission Requirements Submit your completed answer sheet to your instructor at the beginning of Unit 7. Unit 6 True/False Questions Indicate whether the following statements are true or false on the student answer sheet. 1) SQL is the programming language used to manipulate data and data objects in a relational database management system. 2) SQL is a procedural language. 3) A declarative language is a language in which you tell the computer what to do not how. 4) DML, or Data Manipulation Language, contains all the commands for selecting and modifying data. 5) DDL, or Data Definition Language, contains all the commands for selecting and modifying data. 6) The * in SELECT * clause of an SQL statement is a wildcard for returning all columns in a table. 7) The DISTINCT keyword in a SELECT statement returns only unique rows. 8) The FROM keyword is used in a SELECT clause to determine which columns are included in the query. 9) An alias in SQL is a......

Words: 363 - Pages: 2

Pt1420 Unit 6 Assignment 1

...Week 06 Assignments Textbook Reading * Chapter 4 * Chapter 5 sections 5.1, 5.2, and 5.3 (pages 196-201) Week 06 Homework From the Gaddis textbook: * Programming Exercises 2, 6 and 9, on pages 160-161 For the Programming Exercises, design a program means write the pseudocode for the program. Except for Programming Exercise 2, your design should include multiple modules, not just main(). Upload a Microsoft Word document with the pseudocode to your shared PT1420 community website or submit a paper copy to your instructor by the beginning of the Week 7 class. Programing Exercises pg. 160-161 2. Areas of rectangles Module Main() Declare width1 integer = 0 Declare length1 integer = 0 Declare width2 integer = 0 Declare length2 integer = 0 Declare area1 integer = 0 Declare area2 integer = 0 Call rectangle1 (width1, length1, area1) Call rectangle2 (width2, length2, area2) Call comparison (rectangle1, rectangle2) Display “press enter to continue” End module Module rectangle1 (value width1 as integer, value length1 as integer, value area1 as integer) Display "Enter the width of rectangle 1” Input width1 Display "Enter the length of rectangle 1" Input length1 area1 = width1 * length1 End module Module rectangle2 (value width2 as integer, value length2 as integer, value area2 as integer) Display "Enter the width of rectangle 2” Input width2 Display "Enter the length of rectangle 2" Input length2 area2 = width2 * length2 End......

Words: 764 - Pages: 4

Nt1310 Unit 6 Assignment 1

...wire-mapping test may be all that’s needed. Slightly more expensive devices do wire-map testing in addition to other basic functions, such as TDR length testing. A wire-map tester consists of a remote unit that you attach to the far end of a connection and the battery-operated, handheld main unit that displays the results. Typically, the tester displays various codes to describe the type of faults it finds. In some cases, you can purchase a tester with multiple remote units that are numbered, so that one person can test several connections without constantly traveling back and forth from one end of the connections to the other to move the remote unit. Continuity Testers - A continuity tester is an even simpler and less expensive device than a wire-map tester. It is designed to check a copper cable connection for basic installation problems, such as opens, shorts, and crossed pairs. These devices usually cannot detect more complicated twisted-pair wiring faults such as split pairs, but they are sufficient for basic cable testing, especially for coaxial cables, which have only two conductors that are not easily confused by the installer. Like a wire-map tester, a continuity tester consists of two separate units that you connect to each end of the cable to be tested. In many cases, the two units can snap together for storage and easy testing of patch cables. Fiber-Optic Test Sources - To measure the strength of an optical signal, a signal source must be at the other end of......

Words: 726 - Pages: 3

Unit 6 Research Assignment 1

...PT2520 Database Concepts Unit 6 Research Assignment 1: Explore the latest ANSI and ISO Standard True/False 23-Jul-2016 Tim Church Daigre ANSI- The American National Standards Institute (ANSI) oversees the creation, promulgation and use of thousands of norms and guidelines that directly impact businesses in nearly every sector: from acoustical devices to construction equipment, from dairy and livestock production to energy distribution, and many more. ANSI is also actively engaged in accreditation - assessing the competence of organizations determining conformance to standards. To enhance both the global competitiveness of U.S. business and the U.S. quality of life by promoting and facilitating voluntary consensus standards and conformity assessment systems, and safeguarding their integrity. ISO- International Organization for Standardization (ISO) is an independent, non-governmental international organization with a membership of 163 national standards bodies. Through its members, it brings together experts to share knowledge and develop voluntary, consensus-based, market relevant International Standards that support innovation and provide solutions to global challenges. Part II- The latest SQL standard was adopted in July 2003 and is often called SQL:2003. One part of the SQL standard, Part 14, SQL/XML (ISO/IEC 9075-14) was revised in 2006 and is often referenced as "SQL/XML:2006". ANSI/ISO/IEC 9075:2003, "Database Language SQL", Parts 1......

Words: 278 - Pages: 2

Unit 6. Assignment 1. Ad User/Group Design Scenario

...Unit 6. Assignment 1. AD User/Group Design Scenario Course Objectives and Learning Outcomes In this assignment, you will recommend a strategy for creating groups. Assignment Requirments Review the following scenario: A junior IT administrator has been tasked with creation groups for a new formed division/s. From: Junior Admin To: IT Admin Subject: Print and Security Issues. I need to provide access to resources thoughout our AD environment and am not sure which strategy is best for each of these situations. Please provide any thoughts or recommendations for group type and scope! Thank you. 1. Marketing wants to be able to print the company newsletter to printers in each department thoughout all domains in the forest? 2. HR wants users from anywhere in the forest to be able to print vacation requests to the printer in the HR Department? 3. Research and Development wants to have administrative access to their workstations and the member server in their department but wants to make certain that these permissions are specific to their local machines, not distributed anywhere else? Junior Admin Respond to the request for help. From: IT Admin To: Junior Admin Subject: Print and Security Issues. I received your e-mail asking how to provide access to resources throughout your AD environment and you are not sure which strategies are best for the different situations you are encountering. I would recommend that since you have a domain for each......

Words: 504 - Pages: 3